2015-02-19 (Th) ESPeri.Impass

The place for the compass spinner to rest was simply left as a hole which may be useful later but the first model will need divots. The first logical shape was a hollow cone. The cone will guide a spinner directly to the center which will ensure accurate positioning. The worry is that the steep, sharp edges of the cone will introduce a lot of friction. Ideally the spinner would be a sharp point meeting a blunt surface since the sharp point will not have a lot of friction, similar to an overturned tea cup balanced on a knitting needle.



External view of enclosure


Internal view of enclosure

The pictures taken for the blog were rendered directly from OpenSCAD rather than using screenshots. This provided a cleaner picture without the unnecessary code window and feedback window.

To do:
  • Design hemispherical spinner rest
  • Design spinner for spheroid compass
  • Design spinner mount for tubular compass
  • Install larger bearing 
  • Cut/bend hanging bracket for spinner
  • Buy spongy material for spinner to land on
  • Test + Evaluate hanging tubular compass
  • Redesign, Rebuild, + Repeat

The rest of the posts for this project have been arranged by date.

A list showing of all the final posts of COMPLETED projects.


This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

2015-02-19 (Th)

Comments